Paiement & Sécurité
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
The LAX COMP Donner Pedal is an analog compressor based on the classic 1176 compressor. It compresses instrument signals from multiple inputs to achieve a very dynamic and fat tone, while maintaining the quality of the original input tone.
You get settings for Sustain, Attack, Limit, and Level, to suit your different musical needs, including big compression, more transients, or just some tonal tweaking. The EQ switch is used to adjust the clarity of the output tone. Also take advantage of the True Bypass circuit. To try it is to adopt it !
Main Features :
- Based on the classic 1176 compressor
- Four settings available
- Two choices of EQ
- Dynamic and fat sound
- 100% analog, True Bypass
Instructions d’installation :
1 Connect the power supply, use a 9V DC 50mA power cable, with center negative polarity.
2 Connect the cable from your instrument to the Jack input on the right side of the pedal.
3 Connect your amp or other pedals to the Output Jack on the left side of the pedal.
4 Press the On/Off footswitch, then adjust the Sustain, Attack, Level and Limit parameters as well as the Tone footswitch.
5 And enjoy your performance!
NOTE : Compressors are most useful for bright, clean, or slightly pushed sounds, and as such should be placed as close to the start of your chain as possible.
1 Connect the power supply, use a 9V DC 50mA power cable, with center negative polarity.
2 Connect the cable from your instrument to the Jack input on the right side of the pedal.
3 Connect your amp or other pedals to the Output Jack on the left side of the pedal.
4 Press the On/Off footswitch, then adjust the Sustain, Attack, Level and Limit parameters as well as the Tone footswitch.
5 And enjoy your performance!
NOTE : Compressors are most useful for bright, clean, or slightly pushed sounds, and as such should be placed as close to the start of your chain as possible.
Details
(Impedance: 470k Ohms)
(Impedance )
center negative polarity
Be sure to always use only a DC 9V AC adapter with center negative polarity. Using an adapter other than the one specified may cause damage or malfunction to the device and pose a risk to your safety.
Always connect the AC adapter to its dedicated outlet that provides the correct voltage required.
Unplug the AC adapter from the outlet during lightning storms or if you will not be using the device for an extended period of time.
Always turn off the power before plugging or unplugging. Be sure to disconnect all cables and the AC adapter before moving the device. This will help prevent malfunctions and damage.
Avoid using the device in any of the following situations, as they may cause it to malfunction:
- Extremely hot or cold environments;
- Under direct sunlight;
- Magnetic fields;
- Near heaters and other sources of heat;
- Sandy or dusty environments;
- Extremely humid environments or environments exposed to splashing water;
- Places with a lot of vibrations.
QUESTIONS ET RÉPONSES
Avoir une question?
Soyez le premier à poser une question à ce sujet.